Unloading of workpieces through the machine spindle in a gentle way by gripper, collet or unloading tube.
The Multi-3000 remove is an electro-pneumatically controlled automatic unloading machine. It is the ideal complement to the bar feeder Multi 3000 or the Multi 3000SL. With the Multi 3000 remove it is possible to unload finished parts from sub- or main spindle. The bars are unloaded by unloading tube, pneumatic gripper or also by collet chuck. After unloading, the bars are placed on a prism. From the prism the parts are transported to a deposit. A light barrier monitors the unloading process.
The coating of the depositing surfaces enables a particularly gentle handling of the finished parts. Even parts such as piston bars can be unloaded without a scratch. The unloading tube is made of POM material. This also ensures gentle handling.
Loading can be done via the main spindle and unloading via the sub spindle. It is also possible to load via the sub spindle and unload via the main spindle.
An important point regarding the compatibility of the loading and unloading automation is the chip conveyor of the sweeping machine. This should ideally convey the chips to the rear. If this is not possible, the highest point of the chip conveyor should be below the main or sub spindle.
The automatic unloader is equipped with a shifting unit as standard. This can be aligned either in X or Z direction. This ensures easy access to the Spindle Liner.
The operation of the automatic unloader is extremely operator friendly and simple. As you only have to adjust 0 – 2 parameters during the conversion of the Remove. This results in a reduction of the downtime of the plant.
Furthermore, the Multi 3000 Remove has a LED status display. This shows the different states of the automatic unloader.
Special coating of the storage surfaces to prevent damage to the finished parts.
Do you need spindle liner for your lathe. We can also offer you these.
|Round profile bars||10 to 102 mm|
|Bar length||150 to 1000 mm, Other lengths upon request|
Round profile bars: Ø 10 to 102 mm
Profile material enveloping circle: 10 to 102 mm
Bar length: 150 up to 1,200 mm other lengths on request
Protection class: IP 54
Power supply: 200 to 415 VAC
Control voltage: 24/5 VDC
Keyboard, display: 4 lines of 20 characters, withLCD backlight
Bar feed: Servodrive
Bar positioning accuracy
Feed rate: ± 0.2 mm
RAL 9010 Pure white
RAL 7012 Basalt grey